language
PRODUCTS
Biotin immunoaffinity column | EASI-EXTRACT® BIOTIN Biotin immunoaffinity column | EASI-EXTRACT® BIOTIN Biotin immunoaffinity column | EASI-EXTRACT® BIOTIN
Manufacturer: R-Biopharm
Origin: Germany
Art No.: RBRP82
Test format: RBRP82 = 10 immunoaffinity columns with 3 ml format.
                       RBRP82B = 50 immunoaffinity columns with 3 ml format.
 
RBRP82 Testing laboratories Quantity: 0 cái

Biotin immunoaffinity column | EASI-EXTRACT® BIOTIN

  • Biotin immunoaffinity column | EASI-EXTRACT® BIOTIN
    Manufacturer: R-Biopharm
    Origin: Germany
    Art No.: RBRP82
    Test format: RBRP82 = 10 immunoaffinity columns with 3 ml format.
                           RBRP82B = 50 immunoaffinity columns with 3 ml format.
     

1. Intended use

Biotin Immunoaffinity columns for use in conjuntion with an HPLC or LC-MS/MS system for detection of biotin in a wide range of commodities.

2. General information

The procedure is based on monoclonal antibody technology, which makes the test highly specific, sensitive, rapid and simple to perform. The columns contain a gel suspension of monoclonal antibody specific to the vitamin of interest.

Following extraction of the vitamin the sample extract is diluted with buffer and filtered before being passed slowly through the immunoaffinity column. Any vitamin which is present in the sample is retained by the antibody within the gel suspension. The column is washed to remove any unbound material and the vitamin is then released from the column following elution with solvent. The eluate is collected, evaporated and reconstituted prior to analysis by HPLC or LC-MS/MS.

* Benefits:

AOAC Official Final Action method 2016.02.

Uses monoclonal antibody.

Extraction uses buffer and enzymes.

Can be used with pigmented samples.

Can be stored at 21 – 25 °C.

The columns are suitable for testing a wide range of commodities.

* Accessories

Immunoaffinity Column Rack

Immunoaffinity Column Accessory Pack

3. Specifications Biotin immunoaffinity column | EASI-EXTRACT® BIOTIN

Art. No RBRP82 / RBRP82B
Test format - RBRP82 = 10 immunoaffinity columns with 3 ml format.
- RBRP82B = 50 immunoaffinity columns with 3 ml format.
Sample preparation - Sample is extracted using buffer and enzymes, filtered and diluted ready for applying to the immunoaffinity column.
- Incubation time: Sample is incubated for 2 hours at 37 °C followed by 30 mins at 100 °C.
Evaluation HPLC or LC-MS/MS system
LOD (Detection Limit) Information provided is typical LOD obtained by R-Biopharm. Please note that this is dependant on method, LC conditions and equipment used.
Biotin 15,625 ng / ml
Available application notes

- Methods are available for a range of commodities. Please contact your local R-Biopharm distributor for further information.

- Product referenced in AOAC Official Final Action Method 2016.02

You did not use the site, Click here to remain logged. Timeout: 60 second