language
PRODUCTS
Swab test surface protein | RIDA®CHECK R-Biopharm Swab test surface protein | RIDA®CHECK R-Biopharm Swab test surface protein | RIDA®CHECK R-Biopharm
Manufacturer: R-Biopharm
Origin: Germany
Code: R1091
Pack size: 100 tests/box
R1091 THỰC PHẨM 1 Quantity: 20 cái

Swab test surface protein | RIDA®CHECK R-Biopharm

  • Swab test surface protein | RIDA®CHECK R-Biopharm
    Manufacturer: R-Biopharm
    Origin: Germany
    Code: R1091
    Pack size: 100 tests/box

1. Intended use

RIDA®CHECK is a rapid swab test for monitoring the efficiency of surface cleaning procedures in the production environment. The test is intended to be used as a support for hygiene monitoring as well as general protein screening in allergen management.

2. General infomation

During production processes protein residues from raw materials or food stuffs may remain on surfaces. These should be removed during the normal cleaning process. However cleaning actions are not always successful and consequently contamination may still remain and possibly lead to the cause of future health issues.

RIDA®CHECK’s methodology is based on the detection of protein residues and is independent of ATP. During the assay the swabbed protein residues react with the indicator molecule. This interaction induces a colour change of the colorimetric substance from yellow to green.  According to the intensity of the colour change (yellow → light green → green → dark green) the guideline determination of the contamination level is possible. The size of the sampling area should equal to approximately 20 cm2 (4.5 cm x 4.5 cm).

3. Benefits

  • Easy: Open package –> apply –> read.
  • Fast: Results in seconds.
  • Ready-to-use: No preparation of reagents, no laboratory equipment.
  • Unambiguous: Green colouration of the swab = protein detected.
  • Efficient: Low cost alternative to ATP measurement.
  • Sensitive: Sensitive detection of protein residues (LOD = 20 µg).

4. Specifications RIDA CHECK R1091

- Code: R1091
- Test format: R1091: 50 swabs for 100 determinations
- Sample preparation: No sample preparation
- Incubation time: 10 sec to 2 min (max.)
- LOD (Detection Limit): 20 µg protein
- Cross Reactivity: RIDA®CHECK indicators are able to cross-react with bio-degradable disinfectants (mainly Chlorhexidine) which are almost entirely used for clinical or pharmaceutical purposes. In the presence of alkaline solution (pH 11 or higher) an intense colour change to dark green or blue can be observed.
- Detected analyte: Protein residues.
- Evaluation: Colour change of colour indicator.
You did not use the site, Click here to remain logged. Timeout: 60 second